Tempo; Time Signature - M-Audio DCP-200 User Manual

DCP-200
3
116
Reverb
Song
RECORD
Data Control
[Assignable]

Tempo

The metronome can be programmed for any tempo between 20 beats per minute (bpm) and 280 bpm.
‣
To change the metronome's tempo:
2

Time Signature

The metronome can support the following time signatures: 2/2, 2/4, 3/4, 4/4, 5/4, 6/8, 7/8, 9/8, 12/8
‣
To change the metronome's time signature:
1
PNo
Reverb
Song
RECORD
Data Control
[Assignable]
Turn the Data Control knob clockwise to increase the metronome
volume, or counter-clockwise to decrease the metronome volume.
The metronome volume level will be indicated as a value from 0-127
in the LED display window.
Voice / —
Function
‣
NOTE: Now the Data Control knob is assigned to controlling
Metronome
metronome volume instead of Voice Selection. To reassign the Data
Control knob for Voice Selection, press the Voice / Function button
and then press the Eb2 key. (This procedure is illustrated at the
beginning of the "Edit Mode" section.)
120
Voice / —
Reverb
Function
1
Song Metronome
RECORD
Data Control
[Assignable]
Press the Voice/Function button on the left hand panel.
Voice / —
Function
Metronome
1. P ress and hold the Metronome button (5). The LED
display will show the current tempo.
2. Turn the Data Control knob clockwise to increase
tempo, or counter-clockwise to decrease tempo.
19
User Guide