Using Dcp-300 For The First Time; Connect The Pedal Board; Connect The Power Cable - M-Audio DCP-300 User Manual

DCP-300
5

Using DCP-300 for the First Time

Everything you need to know to start making music with DCP-300 is right here in this short section.

Connect the Pedal Board

AC100-240V – 50/60HZ

Connect the Power Cable

1
2
PEDAL
CAUTION
AC100-240V – 50/60HZ
PEDAL
CAUTION
Connect the Pedal Board cable to the Pedal
connector on the DCP-300 rear panel.
Make sure that the Power On/Off Switch is in the
"Off" (up) position.
Connect the included AC cable to the Power Socket on
the DCP-300 rear panel, and plug the other end into an
active AC outlet.
9
User Guide