Sata Configuration - Asus P9D-E/4L User Manual

PCH Azalia Configuration
Allows you to control the detection of the Azalia device. Configuration options:
[Auto] [Disabled]
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
PCH Azalia Configuration
Azalia
4.4.3

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA
devices. The SATA Port items show Not Present if no SATA device is installed to
the corresponding SATA port.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Advanced
SATA Controller(s)
SATA Mode Selection
S.M.A.R.T. Status Check
Serial ATA Port 0
Software Preserve
Port 0
Hot Plug
SATA Device Type
Spin Up Device
Serial ATA Port 1
Software Preserve
Port 1
Hot Plug
SATA Device Type
Spin Up Device
Serial ATA Port 2
Software Preserve
Port 2
Hot Plug
SATA Device Type
Spin Up Device
SATA Controller(s) [Enabled]
This allows you to enable or disable the SATA Device. Configuration options:
[Enabled] [Disabled]
SATA Mode Selection [AHCI]
This allows you to choose how SATA controller(s) should operate. Configuration
options: [AHCI] [IDE] [RAID]
S.M.A.R.T. Status Check [Enabled]
Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T.) is a monitor
system. When read/write of your hard disk errors occur, this feature allows the hard
disk to report warning messages during the POST. Configuration options: [Enabled]
[Disabled]
4-16
[Auto]
[Enabled]
[AHCI]
[Enabled]
HardDisk (250.0GB)
SUPPORTED
[Enabled]
[Enabled]
[Hard Disk Drive]
[Disabled]
HardDisk (250.0GB)
SUPPORTED
[Enabled]
[Enabled]
[Hard Disk Driver]
[Disabled]
HardDisk (250.0GB)
SUPPORTED
[Enabled]
[Enabled]
[Hard Disk Driver]
[Disabled]
Control Detection of
the Azalia device.
Disabled = Azalia will be
unconditionally disabled
Enabled = Azalia will be
unconditionally Enabled
Auto = Azalia will be
enabled if present,
disabled otherwise.
Enable or disable SATA
Device.
Chapter 4: BIOS setup