Operating Instructions; Control Panel Functions; Menu Map - Chauvet SlimPAR User Manual

4. O
PERATING

Control Panel Functions

Access control panel functions using the four buttons located directly underneath the LED display on the control panel.
B
UTTON
<MENU>
<UP>
<DOWN>
<ENTER>
The Control Panel shows the current state of the unit. It is used to select the operating mode, as well as the sub-features.
For a detailed layout of the control panel functions, please see the "menu map" section below.
M
AIN
F
UNCTION
P--
3-CH
7-CH
C--
S--
U--
SlimPAR™ 38 User Manual Rev. 3
I
NSTRUCTIONS
F
UNCTION
Used to scroll through the
current operating mode, as
well as back out of the
current menu option
Used to select increasing
advancement in the value
Used to select decreasing
advancement in the value
Used to select a value and
store it to memory

Menu Map

S -
UB
F S
UNCTION ELECTION
P1 7 Color Switching
P2 7 Color Fading
P3 3 Color Switching
P4 3 Color Fading
P5 7 Color sound active
P6 3 Color sound active
d001~d512
d001~d512
C1 Red
C2 Green
C3 Blue
C4 Cyan
C5 Magenta
C6 Yellow
C7 White
S001~S100 (the default range is S050)
r--- Red
g--- Green
B--- Blue
MENU UP DOWN ENTER
S -S
UB ELECTION
Use the Audio
Adjustment Knob
located on the back
of the fixture
000~100
I
NSTRUCTION
Select between 2 switching
and 2 fading built-in
programs
Select between 2 sound
active programs
Select 3-channel DMX
mode (RGB control)
Select 7-channel DMX
mode: RGB, macros, run
speed, strobe,
automatic/sound, dimmer
Select between 7 static
colors. The display will
read C1~C7. The colors
that each of these
represent are indicated to
the left.
This is the speed range for
the 4 switching and fading
built-in programs
Combine red, green, and
blue to create a custom,
static color
Page 9 of 15