Table of Contents
Advertisement
4. O
PERATION
Control Panel
To access the control panel functions, use the four buttons located underneath the
display.
Operation
Menu Map
Configuration
(DMX)
DMX Personality
and Starting
Address
Page 10 of 16
Button
<MENU>
Selects an operation mode or backs out of the current menu option
<UP>
Scrolls up the list of options or selects a higher value
<DOWN>
Scrolls down the list of options or selects a lower value
<ENTER>
Activates a menu option or a selected value
Mode
Programming Steps
3-CH
DMX Mode
15CH
Sound Active
Mode
Automatic
Mode
Auto Program
S--
Speed
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The COREbar™ 4 uses up to 15 DMX channels in its 15-channel DMX mode, which
defines the highest configurable address to 498.
If unfamiliar with DMX, download the DMX Primer from www.chauvetlighting.com.
To select the DMX personality and starting address, do the following:
1.
Press <MENU> repeatedly until 3-CH (3-channel mode) or 15CH(15-channel mode)
shows on the display.
2.
Press <ENTER> and d 1—d512 shows on the display.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Function
Description
Selects DMX personality and
d 1—d512
starting address
Snd
Sets Sound-Active mode
AUTO
Sets auto program
S 1—S100 Sets auto program speed
COREbar™ 4 User Manual
Advertisement
Table of Contents
