Installation Instructions; Window Requirements; Basic Tools Needed - Daewoo WM-501 Use & Care Manual

• WINDOW REQUIREMENTS

These instructions are provided for a standard double hung
window or mobile home double hung window installation in
windows 22 in (559mm) to 36 in (915mm). The upper and lower
sash must open sufficiently to allow a clear vertical opening of
14 1 /2 in (368mm) from the bottom of the sash to the window stool.
Select a centrally located window on the side of the room that
receives the least direct sunlight. There should be no obstruction to
air flow either inside(i.e curtains) or outside (i.e fence, wall or
bushes).
Read this entire installation manual thoroughly before beginning
the installation.
Make sure you have the necessary tools and other materials for the job. Study the illustrations in these
instructions to become familiar with important details of the installation process.
Read the Use & Care manual to become familiar with the operation of your room air conditioner.
IMPORTANT :
It is important, both for your personal safety and to avoid possible damage to your
home, that you observe the safety instructions that are given following.
After installing the unit, re-read these instructions to make sure you have completed each step and all parts are
fastened in place for a secure installation.
For best results, perform the installation procedure in the order given. Doing so will minimize the time required
to install the unit.

• BASIC TOOLS NEEDED

• Standard screwdriver
• Carpenter's level
• Electric drill

INSTALLATION INSTRUCTIONS

• Phillips screwdriver
• 1/4" hex driver
• 1/8" drill bit
14 1/2" MIN
• Sharp knife
• Tape measure
3
22" TO 36"