Installation Instructions; Location Of Installation; Before Installation - Daewoo DWB-123CH Use & Care Manual

Window type room air conditioner

Hide thumbs

Table Of Contents

Table of Contents

• LOCATION OF INSTALLATION

1. Install the unit at a place having sufficient strength to support the unit securely.

2. Do not install the unit at a place where leakage of combustible gas is suspected.

3. If the air conditioner is operated in an atmosphere containing oils (including machine oil), salt near a

coastal area, etc, such substances may lead to failure of the unit.

4. Provide sufficient clearance or space around the air inlet and air outlet so that air flow will not be

obstructed (See following figures).

minimum

CAUTION

• The air conditioner shall be installed in accordance with the national wiring regulation.

1. Install an exclusive main power switch (main circuit breaker) or GFI (Ground Fault Interrupted) Switch.

2. Be sure to use grounded power source.

3. Power source for DWB-123CH is 240V.

4. Consumer must pay charges for wiring and installation.

• BEFORE INSTALLATION

Test Run Unit : Plug unit into proper power supply outlet.

Refer to operating instructions in this manual for comfortable living. Check all controls for correct

operation, then unplug unit.

Determine Correct Mounting procedure-Refer to Window Installation or Through the Wall Installation.

WARNING :

• Moving parts can cause personal injury. Be careful when test-running unit. Do not operate

unit with front grille removed .

• Be sure to use an exclusive power source.

• Contact service man for replacement of power cord.