Daewoo DWB-123CH Use & Care Manual page 6

7. HOW TO INSTALL THE DRAIN CAP
Install the drain cap like Fig. of the right side.
There are two kinds of method to install the drain cap.
The first method is that the shape of hole like
It is good for the household.
The second method is that the shape of hole is like
It is good for the shop.
8. Remain or Remove the 'CAP BASE'
Iocated on the bottom of BASE as follows.
General Cooling &
Using mode heating
CAP BASE Remove
CAUTION : You must remove the 'CAP BASE' when you operate in heating mode.
9. Reinstall the unit, side screws, front grille.
CAUTION
• When the front grille is reinstalled, the DOOR VENT should be in position first so that it would not
be bent by grille.
Cooling Heating
only
Attach Remove
6
M4x8 SCREW: Use Screw(M4x8) only.
Door Vent
The rear side of the unit
SEAL DRAIN
Drain Cap