Replacing A Turn Signal Light Bulb - Yamaha EC-03 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
3
1. Tail/brake light bulb
4
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
5
wise until it stops.
4. Install the lens by installing the
6
screws. NOTICE: Do not over-
tighten the screws, otherwise
7
the lens may break.
8
9
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
[ECA10681]
pushing it in and turning it counter-
clockwise.
EAU24204
1
1. Turn signal light bulb
8-13
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
1