Replacing The Tail/Brake Light Bulb - Yamaha EC-03 Owner's Manual

1
1. Screw
2. Disconnect the headlight coupler,
and then remove the bulb cover.
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
1. Headlight bulb holder
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
5. Install the headlight bulb cover,
1
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
2
headlight beam if necessary.
Replacing the tail/brake light
1
bulb
1. Tail/brake light lens
2. Screw
8-12
1. Remove the tail/brake light lens by
removing the screws.
1
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24133
2
3
4
5
2
6
7
8
9