Using The Security Lock - Yamaha EC-03 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Speed warning indicator
The warning light flashes when vehicle
speed exceeds 45 km/h. At the same
1
time, the speed warning indicator
"SPEED" appears.
2
Error warnings
If a problem is detected, the warning
3
light comes on. In this case, check for
the warning mark "
4 mark also appears, have a Yamaha
dealer check the vehicle.
5
Warning mark "
This warning mark flashes if a problem
6
is detected. If the warning mark keeps
flashing after turning the key to "OFF"
and then back to "ON", have a Yamaha
7
dealer check the vehicle.
8 TIP
After turning the key to "ON", the warn-
ing mark appears. If the warning mark
9
goes out after a few seconds, there is
no malfunction. Go ahead with riding.

Using the security lock

The EC-03 is equipped with a security
lock that can be used by registering a
security number. Once the security
number has been set, the vehicle can-
not be ridden unless the correct securi-
ty number is entered, even if the key is
turned to "ON".
". If this warning
Registering and changing the secu-
rity number
WARNING
"
Be sure to stop the vehicle before
registering or changing the security
number. Changing settings while
riding can distract the operator and
increase the risk of an accident.
TIP
The
change mode is canceled if the regis-
tering procedure is not completed in
one minute. If the mode cancels, repeat
the procedure.
1. Turn the key to "ON".
All display segments appear for a
few seconds, then the vehicle en-
security number registration/
4-7
ters the standby
EAU50033
"PUSH" flashes.
1
EWA15610
1. Security lock indicator "
TIP
When the security lock has been
locked, the security number indicator
" LOCK" appears when the vehicle is
in the standby mode.
2. Change to the riding mode by
pushing any of the buttons.
mode and
LOCK"