Adjusting The Settings And Copying A Document - Kodak HERO 2.2 Extended User Manual

Copying

Adjusting the settings and copying a document

57
1. Place the original document in the ADF or on the scanner glass.
2. Press .
3. Press to select Copy Document , then press OK .
4. Press to select an option, then press
Copy Document
Option
Quantity
Color
Copy Size
Plain Paper Quality
Photo Paper Quality
Brightness
Save as Defaults
5. Press .
www.kodak.com/go/aiosupport
or
Settings
1 (default) to 99 The number of copies that print.
Black & White Makes a black and white copy.
Color Makes a color copy.
Same Size The copy is the same size as the
(default) original.
Fit to Page The printer detects the size of the
original on the scanner glass and the
size of the paper in the paper tray, and
automatically reduces or enlarges the
original so that the copy fits on the
paper.
20% to 500% Reduces up to 20% or enlarges up to
500% of the original size.
Normal Good quality output; prints faster than
(default) Best.
Best The highest quality, but the slowest
print speed; eliminates the banding
effect that sometimes occurs.
Draft The fastest print speed, but the lowest
quality.
Auto. The printer detects photo paper in the
(default) paper tray and sets Best quality
automatically.
Normal, –3 to +3 Lightens or darkens the copy.
(Normal is default) Normal is no change from the original;
–3 is the darkest; +3 is the lightest.
No / Yes To save the settings as the new
default, press OK . With Yes selected,
press OK .
to change the setting.
Description