Copying; Loading Originals For Copying; Copying A Document; Using The Default Settings To Copy A Document - Kodak HERO 2.2 Extended User Manual

7

Copying

Loading originals for copying

Copying a document

Using the default settings to copy a document

56
You can copy documents and photographs with your all-in-one printer. The printer
produces high-quality color or black-and-white copies on a variety of paper types
(see Paper types, page
You can copy multiple-page documents automatically by loading the originals (up to
35 pages) face up in the Automatic Document Feeder (ADF).
IMPORTANT: The ADF accepts plain paper originals from 6.9 to 8.5 in. (18 to 22 cm) wide
and 9.8 to 11.7 in. (25 to 30 cm) long.
To copy a photo, documents on thick paper, or a document that is too small or too
large to fit in the ADF, place the original face down on the scanner glass.
For more information on loading originals, see
You can copy a document using the default settings, or you can adjust the quantity,
size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page 103), or defaults that you have set on the printer (see Save as
Defaults at the bottom of the table under
document, page 57).
1. Place the original document in the ADF or on the scanner glass.
2. Press .
3. Press or to select Copy Document .
4. Press OK .
5. Press .
NOTE: If you load the original document in the ADF, the ADF automatically feeds
the document into the printer when you begin copying.
www.kodak.com/go/aiosupport
35).
Adjusting the settings and copying a
Loading originals, page
Resetting factory
40.