Vax 88000 User Manual page 7

Operation
How to operate your cleaner continued...
Important: Never leave the cleaner unattended with the power on.
Vacuum carpets thoroughly with dry vacuum cleaner before washing.
Plug the cord into a mains
electricity socket. Turn the
power and brush bar switches
on. The switches are located on
the front of the cleaner, above
the solution reservoir. The
power switch controls the
vacuum motor and pump.
The brush switch only turns the
rotating brush bar on and off
when the power switch is on.
www.vax.com.au
Press on the handle release
pedal and pull the cleaner back
into a reclined position.
While pressing the solution
release trigger, pull the cleaner
in a backward motion. Release
the trigger and push forward
over the same path to remove
the dirty water and solution
from the carpet. Repeat if
necessary. For best results use
a smooth steady action -
keeping the nozzle flat against
the carpet. When the dirty
water reaches the max fill line
on the dirty water tank, empty
the tank.
6