Vax 88000 User Manual page 5

Operation
Tool Caddy Use
Wrap the cord around
the upper and lower
cord clips.
Run the hose to the
upper caddy and press
into hose clip #1. (See
image above for hose
clip position.)
www.vax.com.au
Detach the Upholstery
hose adapter from the
end of the hose and
slide it onto the adapter
post.
Continue wrapping the
hose clockwise around
the tool caddies,
pressing the hose into
the groove on the
bottom of the lower
tool caddy.
Slide the Upholstery
tool into the middle slot
of the lower tool caddy.
Run the hose back to
the upper caddy and
press into hose clip #2
(See image above for
hose clip positions.)
Slide the adapter end
of the hose into the left
slot on the lower tool
caddy. Be sure to line
up the pushpin with the
slot and press down
until secure in place.
Lock the attachment
end of the hose into
place by pressing
down onto the post
located on the right
side of the lower tool
caddy, until secure
in place.
4