Table of Contents
Related Manuals for Vax 8131 MULTIFUNCTION
Summary of Contents for Vax 8131 MULTIFUNCTION
- Page 1 Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 1 Multifunction Vax model number: 8131 Please read carefully before using this cleaner. www.vax.co.uk Always fully extend the mains cable before use. Retain for future reference.
- Page 2 Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 2 www.vax.co.uk 1. Diagram 8131 Pets and Stairs Fig.1/1 1 Motor unit 10 Upholstery / stair tool 2 Cone filter unit 11 Crevice tool 3 Clean water bucket 12 Dusting brush 4 Dirty water bucket 13 TurboTool 5 ‘For Pets’...
-
Page 3: Safety Information
Do not use with a damaged cord or plug. If the supply cord and/or plug is damaged, they must be replaced PLEASE KEEP THESE INSTRUCTIONS by the manufacturer, a Vax Service Agent or similarly FOR FURTHER USE. qualified persons in order to avoid hazard. -
Page 4: Initial Setup
4. Preparing the Unit for Carpet Washing IMPORTANT: Always unplug the vacuum cleaner from the electrical outlet before assembling or IMPORTANT: Use only Vax AAA carpet cleaner removing the accessories. with this machine. Using other cleaning solutions may cause excessive foaming and damage the unit. - Page 5 Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 5 5. Carpet Washing Instructions Fig.4/4 Fig.5/1 WASHING DRYING Fig.5/2 Fig.4/5 Fig.5/3 operation...
- Page 6 Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 6 www.vax.co.uk 6. Upholstery Washing Instructions 7. Cleaning Up After Use Fig.6/1 Fig.7/1 DRYING WASHING Fig.6/2 Fig.7/2 Fig.7/3 Fig.6/3 cleaning up...
-
Page 7: Maintaining Your Unit
Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 7 8. Maintaining Your Unit 9. Clearing Blockages Replace the cone filter regulalrly (Fig.8/1). WARNING: To reduce the risk of electric shock, the power cord must be disconnected before performing maintenance or troubleshooting checks. -
Page 8: Troubleshooting
Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 8 www.vax.co.uk Switch the vacuum cleaner off and disconnect the power 10. Troubleshooting plug from the electrical outlet. WARNING: To reduce the risk of personal injury, Lay the TurboBrush floor head on a flat surface and turn unplug the vacuum cleaner before performing over to expose the brushbar. -
Page 9: Technical Specification
Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 9 11. Technical Specification Voltage: 220-240V ~50Hz Wattage: 1300W Capacity: Clean water tank: 4 litres Dirty water tank: 8 litres Filters: Pre-motor filters Post-motor filter Cone filter Cord length: 7.5m Weight: 7.5kg Subject to technical change without notice. - Page 10 Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 10 www.vax.co.uk This page has been left intentionally blank...
- Page 11 Vax 8131A Pet&Stair Guide.qxd 13/6/07 17:34 Page 11 This page has been left intentionally blank...
- Page 12 17:34 Page 12 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the 8131Pets and Stairs multifunction cleaner is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive EMC: 89/336/EEC Electromagnetic Compatibility Directive Waste electrical products should not be disposed of with household waste.
Need help?
Do you have a question about the 8131 MULTIFUNCTION and is the answer not in the manual?
Questions and answers