Page 1
Action 802 Let’s get started vax.co.uk U86-AB-Be / U86-AB-Pe / U86-AB-Re U86-AB_e_Series_Action_802_UG_[J2543]_Amd_02.07.14.indd 1 02/07/2014 13:47...
Page 2
Always make sure both the pre- extension cords, non-approved whilst using the vacuum cleaner • Only Vax recommended tools should motor/post motor filters are in place extension cords may overheat. • This appliance can be used by be used with this vacuum cleaner.
Page 3
Maintaining your carpets will ensure they keep their appearance for longer. You’ve chosen carpets 3 in 1 tool Getting to know your machine for your home for a reason and Vax will help you take good care of them. Taking care of your Action 802 Getting started Also inside this guide are instructions on maintaining your new machine, so that it’s always ready...
Getting to know your machine Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Handle Assembling your upright Extension tube Insert the back panel Insert the lower cord Now take the small Place the dirt container onto the machine. Dirt container release button Handle release button into the floorhead.
Page 5
Using your machine Taking care of your machine Emptying and cleaning the dirt container Before you begin cleaning • Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/attachments, or removing and emptying the dirt container. •...
Page 6
Taking care of your machine Let’s talk technical Cleaning the shroud Removing debris from the brushbar 40˚C 24hr Switch off your vacuum cleaner at the main socket. Using a pair of scissors cut any hair or debris free from around the brushbar. Place fingers under the Remove the pre-motor Tap the shroud over the...
Page 7
Let’s talk technical Accessories Don’t forget your accessories! Changing the belt Order at: www.vax.co.uk/spares-and-solutions Pro cleaning kit 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach...
Page 8
What to do if it goes wrong Getting in touch Problem Solution • The plug may not be fully pushed into the electrical socket. • Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse. Why won’t the vacuum •...
Need help?
Do you have a question about the action 802 U86-AB-Be and is the answer not in the manual?
Questions and answers