Using The “Scan” Function With Your Cassette Tape Player - Ford Thunderbird Owner's Manual

Using the "SCAN" function with your
cassette tape player
Press the "SCAN/TUNE" button to enter the
scan mode (display indicates "SCN").
Pushing the right a side of the "SEEK"
button will begin the forward scan mode on
the tape currently playing, stopping on each
tape selection for approximately an
eight-second sampling.
Pushing the left b side of the "SEEK"
button will begin the reverse scan mode,
stopping on each previous tape selection for
approximately an eight-second sampling.
While scanning, the display indicates whirling
sprockets plus an "S" m.
To stop the scan mode on the presently
sampled tape selection, press the
"SCAN/TUNE" button again.
How to change the side of the tape being
played
The alternate side of the tape can be selected
at any time by pressing the "PLAY/PROG"
button.
How to eject the tape
To stop the tape and eject the cassette, press the
"EJCT" button. The radio will resume playing if
the radio power is on. The tape cartridge can be
ejected with radio power (and/or ignition) on or
off.
53