Subscribe to Our Youtube Channel
Related Manuals for Clarke WARRIOR 30
Summary of Contents for Clarke WARRIOR 30
-
Page 1: Air Compressor
WARRIOR 30 & 60 WARRIOR 30 & 60 AIR COMPRESSOR AIR COMPRESSOR OPERATING & MAINTENANCE INSTRUCTIONS 0903... - Page 2 - Gasket Set FN216HN0001 PARTS AND SERVICE For Spare Parts and Service, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622 e-mail as follows: PARTS: Parts@clarkeinternational.com...
-
Page 3: Table Of Contents
Thank you for purchasing this Warrior Air Compressor which is available in two configurations - WARRIOR 30, fitted with a 24 litre air receiver and WARRIOR 60, COMPRESSOR fitted with a 50 litre receiver. Before attempting to operate the machine, please read this leaflet thoroughly and carefully follow the instructions given. -
Page 4: Safety Precautions
2. DO NOT operate your compressor with any guards removed. 3. Electrical or mechanical repairs should only be carried out by a qualified engineer. If problems occur, contact your Clarke dealer. 4. Before carrying out any maintenance, ensure the pressure is expelled from the air receiver, and the machine is disconnected from the mains supply. -
Page 5: Electrical Connections
1 FN014013042 Current Device (RCD) 62 Washer FN010041000 79 Steel Tube 4 FN117HN0001 If in any doubt, DO NOT attempt any connections or repairs yourself. Consult a qualified 63 Tube FN046001000 80 Adapter 1 FN011248000 electrician, or your local Clarke outlet. -
Page 6: Preparation For Use
Please note that the details and specifications contained herein, are correct at the time of going to NOTE: If you intend using your compressor for spraying, read also the ‘Helpful print. However, CLARKE INTERNATIONAL reserve the right to change specifications at any time without Hints on Spraying” booklet - supplied with the machine. - Page 7 (see also item 1) when pressure reduces to process in any way. However, should problems develop with the cut-in, cut out approx 95 psi. settings, consult your local Clarke International Service Dep’t. Air leaking from Faulty non-return First drain the receiver...
-
Page 8: Shutting Down
If any part of the filter is damaged then you should obtain a replacement. any condensate to drain off when pressure in the reservoir is completely 3. After the first 100 hours use, replace the oil completely using Clarke relieved. Water may also be drained off when the system is under pressure. The compressor oil.
Need help?
Do you have a question about the WARRIOR 30 and is the answer not in the manual?
Questions and answers