Advertisement
Add a User: Press
• At 'Enter User No.' screen, enter a unique two-digit number and press
.
• At the 'New User Code' prompt, enter a new four-digit user code and press
.
Note: Four digit user codes options: 0000 – 9999.
The keypad will confirm the User setting and exit the Settings mode:
Confirmation
Meaning
Short "ding"
User created successfully
Long "ding"
Error– that user number already has a user code assigned.
No sound
User not created – try again. If necessary, delete the user and try
again.
Delete a User: Press
• At 'Enter User No.' prompt, enter the desired two-digit number and press
.
The keypad will "ding" to confirm the User deletion and exit the Settings mode.
Assign Attributes: Press
• At 'Enter User No.' screen, enter the desired two-digit user number and press
. The Assign Attributes menu appears:
1. Authority Level
2. Access Group
3. User Partition
4. RF User Number
5. Pager On or Off
Refer to the system User Guide for assigning the appropriate user settings in the
Assign Attributes Menu.
SINGLE BUTTON ARMING
If desired, the Arming Keys can be set for Single Button Arming by following
prompts to store a valid user code in the keypad. (See the system User Guide
for details on programming user codes.)
When Single Button Arming is disabled, a valid user code is required to arm the
system with the Arming keys.
Enabling Single Button Arming
1. Press and hold down the
seconds. The screen displays the keypad's address.
2. Press
to move to the USER CODE entry screen.
3. Enter a valid four digit user code between 0000 – 9999 and press
save and exit.
Recommended: Set a dedicated user code for this feature.
The user code must be entered for each keypad in the system where Single
Button Arming is desired
to select 'Add a User' option.
to select 'Delete a User' option.
to select 'Assign Attr.' option.
and
keys at the same time for 3
.
- 3 -
to
Advertisement
