Obtaining System Status for Your px4-300d Network
Storage
The System Status page displays space usage information and status information about your px4-300d
Network Storage. It also provides a control panel that enables you to:
Blink the lights
●
Restart
●
Shut down
●
Space Usage
The Space Usage section graphically represents the amount of space used by Shares on the px4-300d.
The exact space used displays in a ToolTip when you mouse over each Share.
Control Panel
The Control Panel displays commands for the px4-300d:
Blink the lights
●
To help identify a specific px4-300dwhen there is more than one device configured on your
network, blink the lights on the front of the px4-300dby clicking:
Restart
●
Restart the px4-300d.
Shut down
●
Shut down the px4-300d.
Before shutting down the px4-300d, be sure you have access to the physical device to turn it on. It
is recommended that you always use the power button to shut down the device.
Device Information
The Device Information section displays various hardware, software, and status details.
Status
The Status Information section displays changes to or issues with your px4-300d. If an issue requires user
action to resolve, such as a warning or error message, the px4-300d Management Console displays a link
in the status message.
The following types of messages can display:
INFORMATION
Identifies that a change has been made to the state of your px4-300d, usually by a
user, such as attaching a peripheral.
WARNING
Identifies that there is a problem with your px4-300d that requires your attention, but
your device will continue to operate normally for now.
ERROR
Identifies an urgent problem with your px4-300d that may result in data loss and
requires your immediate attention.
Obtaining System Status for Your px4-300d Network Storage
Setting up Your px4-300d Network Storage
17