Obtaining System Status for Your Iomega StorCenter
ix12-300r
The System Status page displays space usage information and status information about your Iomega
StorCenter ix12-300r. It also provides a control panel that enables you to:
Blink the lights
●
Restart
●
Shut down
●
Space Usage
The Space Usage section graphically represents the amount of space used by Shares on the ix12-300r.
The exact space used displays in a ToolTip when you mouse over each Share.
Control Panel
The Control Panel displays commands for the ix12-300r:
Blink the lights
●
To help identify a specific ix12-300rwhen there is more than one device configured on your
network, blink the lights on the front of the ix12-300rby clicking:
Restart
●
Restart the ix12-300r.
Shut down
●
Shut down the ix12-300r.
Before shutting down the ix12-300r, be sure you have access to the physical device to turn it on. It
is recommended that you always use the power button to shut down the device.
Device Information
The Device Information section displays various hardware, software, and status details.
Status
The Status Information section displays changes to or issues with your ix12-300r. If an issue requires user
action to resolve, such as a warning or error message, the ix12-300r Management Console displays a link
in the status message.
The following types of messages can display:
INFORMATION
Identifies that a change has been made to the state of your ix12-300r, usually by a
user, such as attaching a peripheral.
WARNING
Identifies that there is a problem with your ix12-300r that requires your attention, but
your device will continue to operate normally for now.
ERROR
Identifies an urgent problem with your ix12-300r that may result in data loss and
requires your immediate attention.
Obtaining System Status for Your Iomega StorCenter ix12-300r
Setting up Your Iomega StorCenter ix12-300r
15