Connecting the XPower 300 to DC Power
CAUTION: Risk of damage to the XPower
300
The XPower 300 must only be operated with a nominal 12
volt battery. The inverter will not operate with a lower
voltage battery. A higher voltage battery will damage the
inverter.
You can connect the inverter to a 12 volt DC power source
using:
•
The cigarette plug wire assembly (page 11)
•
The battery clip wire assembly (page 12)
•
A hardwired connection to the battery (page 14)
Your method will depend on the size of the AC loads you
want to power. When you connect the inverter, refer to
Figure 5 and Figure 6.
①
Figure 5 DC Panel on the XPower 300
①
②
Fan
terminal
10
Red (positive +) terminal
②
③
③
Black (negative –)