Marantz SA8005 Owner's Manual page 50

Contents
2 Playback
Install the desired player software on your computer beforehand.
Use the rear panel USB-DAC port to connect this unit to a computer.
For the connection procedure, refer to the "Connecting a PC or Mac"
(vpage 21) section.
1
Press INPUT to change the media mode to "USB-DAC".
Start playback on the computer's player software.
The input digital audio signal is displayed as shown.
"USB : xxxxk"
(xxxx is the sampling frequency.)
• If the sampling frequency cannot be detected, "Unlock" will be
displayed.
Front panel Display
Connections Playback
"USB : DSD xxxM"
or
Rear panel
Settings
2 Files that can be played back
See "D/A converter" (vpage 68).
NOTE
• Perform operations such as playback and pause on the computer. At this time, you
cannot perform operations with buttons on this unit or the remote control.
• You can also control the volume and equalizer on the computer. Enjoy playing
music at the desired volume.
• When this unit is functioning as a D/A converter, sound is not output from the
computer's speakers.
• If the computer is disconnected from this unit while the computer music playback
software is running, the playback software may freeze. Always exit the playback
software before disconnecting the computer.
• When an abnormality occurs on the computer, disconnect the USB cable and
restart the computer.
• The sampling frequency of the music playback software and sampling frequency
displayed on this unit may differ.
50
Remote
Tips Appendix
Index