Select The Playback Media Mode; Switching The Display's Brightness; Stopping Digital Outputs - Marantz SA8005 Owner's Manual

Contents

Select the playback media mode

1
Press INPUT to select the playback media mode.
Disc : Select to playback a disc.
USB : Select to playback an iPod or USB memory device.
USB-DAC / Coaxial / Optical :
Select to use this unit as a D/A converter.
%
• You can also select the media mode by pressing DISC/INPUT on the main unit.

Switching the display's brightness

The display brightness can be adjusted between four levels. Switching the
display off reduces a source of noise that affects sound quality, enabling
higher sound quality playback.
1
Press DIMMER.
%
• When the display is turned off, the DISPLAY OFF indicator lights.
NOTE
• During stop mode, the display information does not turn off. The information is
turned off only during playback.
Front panel Display
Connections Playback
Rear panel
Settings

Stopping digital outputs

Stopping digital audio output reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
1
During stop mode, press SETUP.
2
Use ui to select "Digital Out", and press ENTER.
3
Use ui to select "Off", and press ENTER.
On (Default) : Outputs the digital signal.
Off : Digital signal is not output.
%
• When digital output is turned off, the "DOFF" indicator lights up on the display.
• The "Digital Out" has a memory retention function where the settings remain
stored and unchanged even when the disc is changed or the power is turned off.
29
Remote
Tips Appendix
Index