Marantz SA8005 Owner's Manual page 49

Contents Connections
w Click the "Advanced" tab.
e Select the sampling rate and bit rate to be applied to the D/A
converter.
• It is recommended that "24 bit, 192000 Hz (Studio Quality)"
is selected.
r Click "Apply".
t Click "Test".
• Check that audio from this unit is output from the computer.
Digital Audio Interface Properties
General Supported Formats Levels
Default Format
Select the sample rate and bit depth to be used when running
in shared mode.
2 channel, 24 bit, 192000 H ｚ (Studio Quality)
2 channel, 24 bit, 44100 H ｚ (Studio Quality)
2 channel, 24 bit, 48000 H ｚ (Studio Quality)
2 channel, 24 bit, 96000 H ｚ (Studio Quality)
2 channel, 24 bit, 192000 H ｚ (Studio Quality)
Allow applications to take exclusive control of this device
Give exclusive mode applications priority
Restore Defaults
Front panel Display
Playback
w
Advanced
t
Test
e
r
OK Cancel Apply
Rear panel
Settings
NOTE
• The dedicated driver must be installed in the computer before this unit is connected
to a computer. Operation will not occur correctly if connected to the computer
before the dedicated driver has been installed. Moreover, if the computer is
running Windows XP as its OS, the computer's speed will decrease significantly,
and a computer restart may be required.
• Operation may fail in some computer hardware and software configurations.
49
Remote
Tips Appendix
Index