User's manual SEAT Portable System
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for a
particular route. No further suggestion is then shown on the button in
question.
Start navigation
Tap on the button of the route which you want to use for the
►
navigation.
If you select a route for which traffic obstructions have been announced,
the P
REVIEW
"Preview TMC" on page 88).
Select whether you want to use the original route (Current route) or
►
a detour (Alternative route).
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "Waiting for GPS-Signal..."
You have the following options:
Wait. As soon as GPS reception is good enough for determining
►
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The window in which you entered your destination
►
will open again. Your destination is saved in the L
list.
Tap on Demo. The route will be calculated using the centre of the
►
destination location as starting point. Navigation will then be
simulated on this route.
Tap on
Note: If you selected the destination on the map, then the Demo button
is not available.
7.3
Managing destinations
Every destination you enter and destinations from the L
DESTINATIONS
F
AVOURITES
particular destination.
Note: Favourites are indicated on the map by a small flag with their
name.
- 46 -
TMC window may open before navigation starts (refer to
(Back) in order to terminate the demonstration.
and I
MPORTED ADDRESSES
list. This makes sense if you frequently navigate to this
AST DESTINATIONS
AST
lists can be saved in the
Navigation