Table of Contents
Advertisement
1. Tap on the map on a symbol which represents a POI, a favourite or
a traffic message.
The N
messages to be found in a small radius around the position on
which you have tapped.
2. Tap on an entry in the list in order to receive detailed information
about it.
You have the following options:
Tap on Interim destination in order to set the selected point as an
►
interim destination. The navigation system will first guide you to this
interim destination. Afterwards you can continue navigation to your
original destination. The Interim destination button is available in
navigation mode only.
Tap on Start navigation in order to navigate to the selected point.
►
Tap on Cancel in order to close the list again.
►
10.6
MyBest POI: POIs on your route
Note: This function is available only during navigation in Vehicle mode
(refer to "Navigation in Vehicle mode" on page 61).
You can stipulate 3 categories of POI for the POIs on your route
function. POIs which lie along your route and match one of these
categories can be quickly displayed and selected as an interim
destination during the navigation.
10.6.1
Displaying POIs along the route
1. Tap on the
top left of the map (refer to point 2 in "Navigation in Vehicle mode"
on page 61).
The POIs on your route bar opens.
It shows symbols of the 3 stipulated categories of POI. The distance
to the nearest POI in each category is indicated. The marking along
the route also indicates whether the POI lies on the right (
(
Note: The POIs on your route bar closes after a few seconds.
If you want the bar to remain open, tap on the
button changes to
Useful functions
list opens. It contains all the POIs, favourites or traffic
EARBY
(POIs on your route) button which appears at the
) in driving direction.
(Fixed).
User's manual SEAT Portable System
(Fix) button. The
) or left
- 79 -
Advertisement
Table of Contents
