Connecting Automatically - Garmin SEAT Portable System User Manual

User's manual SEAT Portable System
Connecting manually
If a Bluetooth connection to a device is active, you must disconnect this
connection first before you can connect to a different device. The
existing connection is disconnected automatically as soon as the
connection to a different device is initiated.
2. In the H
The T
are marked with a green symbol to the right of their name. Devices
which are not connected have white symbols.
3. Please ensure that the Bluetooth connection is working properly.
►
►
►
The corresponding symbol will turn green. The navigation device
connects to the selected device.
4. Tap on
window.
If the telephone to which you want to connect the hands-free module is
not in the list, you can start a search for Bluetooth devices (refer to
"Searching for and pairing Bluetooth devices" on page 113).

Connecting automatically

Note: For automatic connection to be possible, the navigation device
must be saved in the Bluetooth settings on your mobile phone as
"authorised" or "authorised device" (the exact wording can vary from
manufacturer to manufacturer). For details please refer to the manual
issued for your mobile phone.
If the device you want to connect to was either of the two last connected
devices and the Reconnect automatically setting is activated, the
connection will be set up automatically as soon as the device is within
range.
- 116 -
ANDSFREE MODULE
RUSTED DEVICES
Tap on the
connection to the corresponding headset. All active connections
to other devices will then be disconnected.
Tap on the (Connect) symbol in order to connect the
corresponding mobile phone as "Phone 1". The connection to a
headset or to a device which is already connected as "Phone 1"
will be disconnected.
Tap on the (Connect) symbol in order to connect the
corresponding mobile phone as "Phone 2". The connection to a
headset or to a device which is already connected as "Phone 2"
will be disconnected.
(Back) in order to return to the H
window tap on
window opens. Currently connected devices
(Connect) symbol in order to initiate a
(Trusted devices).
ANDSFREE MODULE
Handsfree module