Faq; System Faq; What's Multilingual Embedded Web Configurator; How Do I Access The P-660Hn-T1A Command Line Interface (Cli) - ZyXEL Communications P-660HN-T1A Support Notes

P-660hn series 802.11n 1x1 wireless adsl2+ 4-port gateway
Hide thumbs Also See for P-660HN-T1A:
Table of Contents

Advertisement

FAQ

System FAQ

1. What's Multilingual Embedded Web Configurator?

Multilinggual Embedded Web Configurator means that it can display with 3
kinds of languanges: English, French, and German, Italian. By factory default it
displays with English, and you can change it in Web GUI.

2. How do I access the P-660HN-T1A Command Line Interface (CLI)?

The Command Line Interface is for the Administrator use only, and it could be
accessed via telnet session.
Note: It is protected by super password, '1234' by factory default.

3. How do I update the firmware and configuration file?

You can do this if you access the P-660HN-T1A as Administrator. You can
upload the firmware and configuration file to Prestige from Web Condigurator,
or using FTP or TFTP client software. You CAN NOT upload the firmware and
configuration file via Telnet because the Telnet connection will be dropped
during uploading the firmware. Please do not power off the router right after the
FTP or TFTP uploading is finished, the router will upload the firmware to its
flash at this moment.
Note: There may be firmware that could not be upgraded from Web
Configurator. In this case, ZyXEL will prepare special Upload Software
for you. Please read the firmware release note carefully when you want to
upload a new firmware.
4. How do I upgrade/backup the firmware by using TFTP client program
via LAN?
The P-660HN-T1A allows you to transfer the firmware to P-660HN-T1A using
TFTP program via LAN. The procedure for uploading firmware via TFTP is as
follows.
a. Use the TELNET client program in your PC to login to your
P-660HN-T1A.
b. Enter CI command 'sys stdio 0' to disable Stdio idle timeout
c. To upgrade firmware, use TFTP client program to put firmware in file
'ras' in the Prestige. After data transfer is finished, the P-660HN-T1A
will program the upgraded firmware into FLASH ROM and reboot itself.
d. To backup your firmware, use the TFTP client program to get file 'ras'
from the Prestige.
All contents copyright © 2010 ZyXEL Communications Corporation.
P-660HN Series Support Notes
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-660hn-t1h

Table of Contents