Setup The P-660Hn-T1A As A Dhcp Relay - ZyXEL Communications P-660HN-T1A Support Notes
P-660hn series 802.11n 1x1 wireless adsl2+ 4-port gateway
Hide thumbs
Also See for P-660HN-T1A:
- Manual (2 pages) ,
- User manual (372 pages) ,
- Wireless setup manual (4 pages)
Table of Contents
Advertisement
(2) Configure a LAN IP for the P-660HN-T1A and the DHCP settings in Web
Configurator, Advanced Setup, Network -> LAN.
3. Setup the P-660HN-T1A as a DHCP Relay
What is DHCP Relay?
DHCP stands for Dynamic Host Configuration Protocol. In addition to the
DHCP server feature, the P-660HN-T1A supports the DHCP relay function.
When it is configured as DHCP server, it assigns the IP addresses to the LAN
clients. When it is configured as DHCP relay, it is responsible for forwarding
the requests and responses negotiating between the DHCP clients and the
server. See figure 1.
Setup the P-660HN-T1A as a DHCP Relay
We could set the P-660HN-T1A as a DHCP Relay by the following command
in CLI:
Ip dhcp enif0 mode
All contents copyright © 2010 ZyXEL Communications Corporation.
relay
P-660HN Series Support Notes
42
Advertisement
Table of Contents
