Configuring Dns; Table 11-5 Remote Management: Snmp - ZyXEL Communications P-324 User Manual

Prestige 324 User's Guide
LABEL
SNMP Configuration
Get Community
Set Community
Trap
Community
Destination
SNMP
Service Port
Service Access
Secured Client
IP Address
Apply
Reset

11.7 Configuring DNS

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa.
Refer to the chapter on Wizard Setup for background information.
To change your Prestige's DNS settings, click REMOTE MGMT, then the DNS tab. The screen appears as
shown.
11-10

Table 11-5 Remote Management: SNMP

Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the Prestige using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the Prestige using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Remote Management Screens