ZyXEL Communications Omni 56K USB Lite User Manual page 68

Omni 56K USB Lite
COMMAND BIT
S46=
S48= Bit
0
2
3
4
S52= Bit
7
S56=
S57= bit
4
5-22
DEC HEX
dec hex CND silence detection interval.
0 to 0- To process the CND, silence must be detected for
255 FF the specified interval, in 20 ms units.
dec hex Bit-mapped register.
1 1 Cause CND information to be reported in raw
format.
4 4 Enable data calling tone (CNG) sending.
8 8 Reverse the V.23 channel speed. Originate mode
modem speed (Send/Receive) 1200/75; Answer
mode modem speed (Send/Receive) 75/1200.
16 10 (Work with &D1 command) DTR ON causes the
modem to dial the default number and DTR OFF
causes the modem to hang-up and reset to profile
0. When the modem is idle (waiting for command),
it does not dial any number when DTR changes
from ON to OFF.
dec hex Bit-mapped register.
0 0 Select 'Mark' as the first signal of the V.23
handshaking sequence (default).
128 80 Select 'Space' as the first signal of the V.23
handshaking sequence.
dec hex
0 to 0- Hook flash detect time, in units of 10ms. A value
255 FF of zero use country-specific default duration.
dec hex Bit-mapped register.
16 10 Enables the reporting of Class 1 capability in
response to +FCLASS=?
FUNCTION AND DESCRIPTION REF.
+028
+000
&N12
+000
&N12
&N12
+000
+016
Command Sets