ZyXEL Communications Omni 56K USB Lite User Manual page 49

COMMAND OPTIONS
Ln n=0 to 3
2 *
Mn
M0
M1 *
M2
M3
O
O1
Qn
Q0 *
Q1
Q2
Sr.b=n
Sr.b?
Sr=n
Sr?
T
Vn
V0
V1 *
Xn n=0-7
5 *
Command Sets
FUNCTION AND DESCRIPTION
Speaker volume control. The higher the value, the higher the
volume.
Speaker control:
Speaker is always OFF.
Speaker is ON until carrier is detected.
Speaker is always ON.
Speaker is ON after the last digit is dialed out. Tone dialing is
not heard.
Return to online state.
Force modem to request a retrain.
Result code displayed:
Modem returns result code.
Modem does not return result code.
Modem returns result code but quiet after answering on a
RING. (see also S42.2)
Set bit 'b' of S-register 'r' to value 'n'. 'n' is a binary digit '0' or
'1'.
Display value of bit 'b' of S-register 'r'.
Set S-register 'r' to value 'n'. 'n' must be a decimal number
between 0 and 255.
Display value stored in S-register 'r'.
Tone dial.
Sets display type for Result Codes:
Display result code in numeric form. (See also S35.7 and the
result code table of 'ATXn'.)
Display result code in verbose form.
Result code options, see the Options Table.
Omni 56K USB Lite
REF.
S24.4-6
S21.1-2
S23.7
S40.1
S23.1
S23.6
S23.3-5
5-3