Honeywell Lynx Plus Series User Manual page 50

SUMMARY O O O O F AUDIBLE NOTIFICATION SUMMARY
SUMMARY SUMMARY
Additional Announcements:
Pressing STATUS key once will announce the following primary messages, depending on
the system's status at the time:
Disarmed–Ready to Arm [check system]
Disarmed [not ready to arm]
Armed [away] [stay] [instant] [check system] [exit now]
Pressing the STATUS key twice will announce the following secondary messages, depending
on the system's status at the time:
Fire Alarm + zone voice descriptor
Alarm + zone voice descriptor
Carbon Monoxide Alarm + zone voice descriptor
Carbon Monoxide Fault + zone voice descriptor
Fire Fault + zone voice descriptor
Fault + zone voice descriptor Alarm + zone voice descriptor
Low Battery + zone voice descriptor Fire Fault + zone voice descriptor
System Low Battery
Check System
AC Loss
Zones Bypassed
Chime
NOTE: If there are no secondary messages, the primary status messages will be announced.
F AUDIBLE NOTIFICATION
F AUDIBLE NOTIFICATION F AUDIBLE NOTIFICATION
– 50 –