Honeywell Lynx Plus Series User Manual page 10

QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS
REMOTE PHONE CONTROL OPERATION
To remotely disarm: ---------------------------------
To remotely arm in AWAY mode: --------------
To remotely arm in STAY mode: ---------------
To remotely arm in AWAY or STAY mode with NO DELAY:
To remotely activate X10 devices 01-06: ----
To remotely activate X10 devices 07 & 08:-
To remotely deactivate X10 devices 01-06:
To remotely deactivate X10 devices 07 & 08:
To remotely bypass a zone: ----------------------
To remotely activate forced bypass: ---------
To remotely check system status: -------------
To hang up: ----------------------------------------------
*If forced bypass was enabled by your installer.
OTHER FUNCTIONS
To set the time and date: --------------------------
To set scheduling: ------------------------------------
To activate X10 devices 01-06: -------------------
To activate X10 devices 07 & 08:
To deactivate X10 devices 01-06:...................
To deactivate X10 devices 07 & 08:
To add a user code:
To delete a user code
To turn Test mode on: ------------------------------
To turn Test mode off: -----------------------------
To use the defined AUX function: -
To send message to pager: ------------
To program "Follow Me" reminder phone no:
To delete "Follow Me" reminder phone no:
** Only the master code can be used to add or delete another user code.
** + CODE + user no. (02-08)+ user code
: .....
(except Master Code)
Press and hold AUX key 2 seconds (4 beeps) +
Press and hold AUX key 2 seconds (4 beeps)
+ [1]
+ [2]
+ [3]
[#] + [4] + (2-digit) device no
+ [#] + [4] + (2-digit) device no.
[#] + [7] + (2-digit) device no.
+ [#] + [7] + (2-digit) device no.
+ [6] + zone no.
+ [6] + [#]*
[*]
+ [9]
+ FUNCTION + [63]
+ FUNCTION + [64]
FUNCTION + LIGHTS ON + (2-digit) dev. no.
+ FUNCTION + LIGHTS ON + (2-digit) dev. no.
FUNCTION + LIGHTS OFF + (2-digit) dev. no.
+ FUNCTION + LIGHTS OFF + (2-digit) dev. no.
** + CODE + user number (02-08)
+ TEST
+ OFF
+ FUNCTION + [65] + Enter up to 24
+ FUNCTION
– 10 –
+ [2] or [3] + [0]
.
digits
+ [65]