Ringer Volume; Factory Defaults - Qwest 2.4GHz Multi-Handset Cordless Phone System Owner's Manual

2.4GHz Multi-Handset Cordless Phone System
Ringer
You may select the volume of individual handset ringers.

Ringer Volume

1. Press Menu.
2. Select "Handset Settings" and press OK.
3. Select "Ringer Settings" and press OK.
4. Select either "External Ringer" or "Intercom Ringer" and press OK.
Note: Both can be adjusted, but they can only be adjusted one at a time.
5. Select "Ringer Volume" and press OK. The handset will start ringing.
6. Use the [5] and [6]to adjust the volume. There are seven positions including
mute. Volume level 6 represents the highest, while volume level 0 (the icon of a
bell with an x through it) represents mute.
7. Press when the ringer volume is set to the desired level. An
OK
acknowledgement tone sounds, and the handset returns to the previous menu.
Note: Press End prior to Step 7 to exit without saving changes.
Ringer Pitch
You may also change the pitch of individual
handsets.
1. Press Menu.
2. Select "Handset Settings." Press OK.
3. Select "Ringer Settings." Press OK.
Select either "External Ringer" or "Intercom Ringer." Press OK.
4.
Note: Both can be adjusted, but they can only be adjusted one at a time.
5. Select "Ringer Pitch" press OK. The handset will start ringing.
< >
6. Use the and keys change the pitch up and down. There are sixteen
positions.
7. Press OK when set to the desired pitch. An acknowledgement tone sounds and
the handset returns to the previous menu.

Factory Defaults

Select "Factory Defaults" to return the handset to the factory settings.
Page 30