Table of Contents
Advertisement
QUICK REFERENCE GUIDE
FROM THE BASE
•
Press SPEAKERPHONE, then wait
for dial tone. Dial the desired phone
number.
•
To
end
your
call,
SPEAKERPHONE again.
ANSWERING CALLS
• When there is an incoming phone
call, pressing OFF key on the
handset can stop the ringing.You can
also answer the call simply by
pressing any key except OFF,
VOLUME, INTERCOM and the 3
Services keys.
FROM THE HANDSET:
•
Press any key except OFF, Volume,
INTERCOM and the 3 Services keys.
•
Press OFF to end your call.
FROM THE BASE:
•
Press SPEAKERPHONE. To end
your call, press SPEAKERPHONE
again.
TEMPORARY TONE
•
If your local telephone service
requires rotary (PULSE) dialing,
you can temporarily switch to TONE
dialing for such purposes as
accessing answering machines,
bank-by-phone services, and using
calling cards.
•
To switch from rotary to tone dialing
during a call, press the
*
TONE key.
When you end your call by pressing
OFF or returning the handset to the
base unit, the phone will return to
the rotary (PULSE) mode.
VOLUME CONTROL
press
FROM THE HANDSET
•
The phone must be ON.
•
Located on the side of the Handset,
press the VOLUME UP or VOLUME
DOWN keys to raise or lower the
earpiece volume.
volume levels.
FROM THE BASE
•
The Base Unit has its own volume
control. The VOL Up and Down
keys are located directly above the
SPEAKERPHONE key.
RINGER CONTROL
FROM THE HANDSET
With the Handset in the idle (off) mode:
•
Press MENU
•
Using the
until
3. Ringer Tone/Vol is
highlighted.
1 5
There are 8
/
soft keys, scroll
Advertisement
Table of Contents
