Table of Contents
Advertisement
p
-c
rioriTy
hAnnel
If the Priority channel has been set as Operator Selectable by your dealer, you
can reprogram the Priority channels.
1 Select your desired zone and channel.
2 Press the key programmed as Priority-channel Select.
3 Press
/
to select "NORMAL", "PRIORITY " (
"PRIORITY &2" (
4 Press
to save the setting.
S
r
cAn
everT
The Scan Revert channel is the channel selected when you press the microphone
PTT switch to transmit during scan. Your dealer can program one of the following
types of Scan Revert channels:
•
Selected: The last channel selected before scan.
•
Selected + Talkback: Same as "Selected", plus you can respond to calls on
the channel at which scan is paused.
•
Priority 1/ Priority 2: The Priority channel (either Priority or Priority 2).
•
Priority 1 + Talkback/ Priority2 + Talkback: Same as "Priority / Priority 2",
plus you can respond to calls on the channel at which scan is paused.
•
Last Called + Selected: Same as "Selected + Talkback", plus you can
respond on the last channel on which you received a call after scan has
resumed.
S
elecT
).
), "PRIORITY 2" (
), or
3
Hide quick links:
Advertisement
Table of Contents
