GE DewPro MMY30 User Manual page 33

November 2005
Mode of Operation (cont.)
4-8
14. Identification Field.
Location
in Matrix
VH This field indicates the software version (i.e., version
2.02 or higher).
93
15. Set to Default Values.
Location
in Matrix
VH This field sets all factory defaults.
Note: Anything that has been calibrated will not be
94
reset.
16. Resetting the Device.
Location
in Matrix
VH The device is reset in this field by entering 50.
Note: Reset the device only after field calibration,
99
using the MMY 245 validator.
Description of Function
Description of Function
Description of Function
The Optional Display/User Interface (Option G)