Loading The Roll Paper - Star Micronics TSP700 Series User Manual

Be sure to use roll paper that matches the printer's specification.
When using a paper roll with an 82.5 mm width, remove the paper roll holder as
described on the following page.
Cover open lever
Roll paper
Tension bar

5. Loading the Roll Paper

Push the Cover open lever, and open
the printer cover.
While observing the direction of the
roll, set the paper roll into the hollow,
and pull on the leading edge of the
paper toward you.
Note 1: When using paper with a thick-
ness which requires the use of the ten-
sion bar (65 m paper thickness<100
the tension bar.
– 13 –
m), be sure not to pass the paper under