Casablanca Metropolitan Owner's Manual page 7

M
®
etropolitan
PREPARINg TO INsTALL sWITCH HOUsINg CAP
Step 10. Remove the three screws on
the mounting plate.
Set aside for Step 12.
mOUNTINg
PLATE
SCREWS
(3)
INsTALLINg THE sWITCH HOUsINg CAP
Step 11. Line up the three
threaded holes in the rim of the
switch housing with the three
clearance holes in the mounting
plate. Carefully slide the switch
housing into the mount so that
the threaded holes are directly
behind the clearance holes.
Step 12. Install the three screws
removed in Step 10.
Tighten securely by hand only.
7