Layering And Splitting Tones - Casio CTK-6200 User Manual

5.
Now you can play on the keyboard using the
tone you selected.
• You also can use the R-14 (–, +) buttons to select a demo
tune. Holding down either button will scroll through tone
numbers at high speed. Pressing both of the R-14 (–, +)
buttons at the same time will select tone 001 in the currently
selected group.

Layering and Splitting Tones

You can configure the keyboard to play two different tones at
the same time (Layer) or to play different tones in the left and
right ranges (Split). You can even use Layer and Split in
combination with each other and play three different tones at
the same time.
The UPPER 1 part is used alone when playing an individual
tone on the keyboard. When layering two tones, the UPPER 1
part and UPPER 2 parts are used. When splitting the
keyboard between two tones, the low range of the keyboard
plays the LOWER part.
• One tone across the entire keyboard (page E-14)
This configuration uses the UPPER 1 part only (Layer: Off,
Split: Off).
UPPER 1
• Two layered tones across the entire keyboard (page
E-16)
This configuration uses the UPPER 1 part and UPPER 2
part (Layer: On, Split: Off).
UPPER 1
UPPER 2
• Two tones, one for the left range and one for the right
range of the keyboard (page E-17)
This configuration uses the UPPER 1 part and LOWER part
(Layer: Off, Split: On).
LOWER UPPER 1
Selecting and Playing a Tone
• Three tones, two layered tones for the right range and
one tone for the left range of the keyboard (page E-17)
This configuration uses the UPPER 1 part, UPPER 2 part,
and LOWER part (Layer: On, Split: On).
LOWER
• You can configure the settings described below to adjust
each part when using multiple tones in layer and split
configurations.
To adjust this setting for
each part:
Octave shift
Volume balance
Stereo position, effect
(reverb, chorus) levels, and
other detailed settings
UPPER 1
UPPER 2
Go here for more
information:
Using Octave Shift
(page E-18)
Using the Mixer (page E-38)
E-15