Casio CTK-6200 User Manual page 50

Using the Tone Editor
Parameter Name
DSP On Off
(DSP On/Off)
DSP
DSP Type
(DSP Type)
DSP Parameters 1
through 8
DSP RevSend
(DSP Reverb Send)
*1 See "Preset DSP List" (page E-119) for information about the DSP types of each preset DSP.
*2 The number of DSP parameters, their content, and their setting ranges depend on the DSP type. For details, see "DSP Type
List" (page E-120) and "DSP Parameter List" (page E-121).
E-48
Specifies whether DSP should be applied (on) or not applied (oFF) to notes.
The following four settings become enabled when "on" is selected for this
setting.
Specifies the DSP to be applied to tones using DSP numbers (001 to 100:
Preset DSPs; 101 to 200: User DSPs). Selecting "ton" applies the initial preset
DSP of each tone.
Shows the DSP type number corresponding to the above DSP value that is set
automatically as the initial default setting.
setting and select a different DSP type.
Shows up to eight parameters for "DSP Type".
Adjusts how much reverb is applied to the post-DSP note.
Description
*1
You can modify the initial default
*2
Setting Range
*
oFF , on
*
ton , 001 - 200
*1
01 - 46
*2
*
0 - 40 - 127