Troubleshooting - Casio CTK-6200 User Manual

Hide thumbs Also See for CTK-6200:
Table of Contents

Advertisement

Reference

Troubleshooting

Symptom
Included Accessories
I can't find something that should be
included with the product.
Power Requirements
Power will not turn on.
The display lights up momentarily but power
does not turn on when I press the L-1
(POWER) button.
The Digital Keyboard outputs a loud sound
and then suddenly powers down.
The Digital Keyboard suddenly powers down
after a few minutes.
Display
The display keeps going out or is flashing.
Screen contents are visible only from straight
ahead.
Sound
Nothing happens when I press any keyboard
key.
Nothing happens or notes do not play
normally when I play on the left side of the
keyboard.
Nothing happens when I start an Auto
Accompaniment.
The metronome does not sound.
E-114
Carefully check inside all of the packing materials.
• Check the AC adaptor or make sure that the batteries are facing correctly
(page E-9).
• Replace the batteries with new ones or switch over to AC adaptor power
(page E-9).
• You may have tried to perform some operation while the "Please Wait"
message was displayed, which caused an internal problem. If other
measures do not correct this problem, perform the operation below to turn on
power.
Warning!
The following operation will delete all Digital Keyboard data and return all
settings to their initial factory defaults.
While holding down the R-2 ([B] E.Piano) and R-5 ([E] BASS) buttons, press
the L-1 (POWER) button to turn on power.
Press the L-1 (POWER) button firmly and completely to turn on power.
Replace the batteries with new ones or switch over to AC adaptor power (page
E-9).
This happens when Auto Power Off (page E-13) is triggered.
Replace the batteries with new ones or switch over to AC adaptor power (page
E-9).
This is due to production limitations. It does not indicate malfunction.
• Adjust the main volume setting (page E-13).
• Check if something is plugged into the T-8 (PHONES) jack on the back of the
Digital Keyboard.
• Turn power off and then back on to initialize all keyboard settings (page
E-13).
Press the L-17 (ACCOMP ON/OFF) button to disable chord input with chord
keyboard (page E-24).
• With rhythms E:029 to E:038, nothing will sound until you play a chord on the
keyboard. Try playing a chord (page E-26).
• Check and adjust the accompaniment volume setting (page E-98).
• If there is no user rhythm stored in memory, Auto Accompaniment will not
start when you press the L-16 (START/STOP) button while a rhythm in the
range of F:001 to F:010 is selected (page E-24).
• Turn power off and then back on to initialize all Digital Keyboard settings
(page E-13).
• Check and adjust the metronome volume setting (page E-98).
• Turn power off and then back on to initialize all Digital Keyboard settings
(page E-13).
Action

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wk-6600

Table of Contents