Bios Configuration; Create Raid In Bios - Foxconn Quantumian1 User Manual

5-2 BIOS Configuration

1. Enter the BIOS setup by
2. Use the arrow right/left keys to select the "Advanced" menu, then use the arrow
up/down keys to select the "SATA Configuration" item and press <Enter> to go to the
configuration items.
3. Press <Enter> to select and set the "SATA Mode" option to [RAID Mode].
4. Press <F4> to save the setting then PC will reboot itself.
Advanced
SATA Configuration SATA Configuration
SATA Mode
SATA Port 0
Not Present
Port Hot Plug
SATA Port 1
Not Present
Port Hot Plug
SATA Port 2
Not Present
Port Hot Plug
SATA Port 3
Not Present
Port Hot Plug
SATA Port 4
Not Present
Port Hot Plug

5-3 Create RAID in bIoS

enter RAID bIoS Setup
When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys
simultaneously to enter the main menu of Intel
Option ROM Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184
1. Create RAID Volume 1. Create RAID Volume
2. Delete RAID Volume
RAID Volume :
None Defined.
Physical Disks:
Port Drive Model
0 Hitachi HDS72161 Hitachi HDS72161
1 ST380811AS
SAMSUNG HD161HJ S0V3J9APA30524
2
ST380815AS
3
pressing <DEL> key during the POST(Power On Self Test).
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
[ DISK/VOLUME INFORMATION
Serial #
PVF904�21G2J�M PVF904�21G2J�M PVF904�21G2J�M
5PS1TAGW
5RW1CA37
[↑↓]-Select
(1) IDE Mode.
(2) AHCI Mode.
(3) RAID Mode.
[RAID Mode]
Enabled onboard SATA RAID
option ROM if Launch Storage
OpROM is enabled.
[Disabled]
[Disabled]
→ ← : Select Screen
↑ ↓ : Select Item
[Disabled]
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
[Disabled]
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
[Disabled]
® Rapid Storage Technology enterprise
[ MAIN MENU ]
3. Reset Disks to Non-RAID 3. Reset Disks to Non-RAID
4. Recover Volume Options
5. Exit
]
Size
149.0GB 149.0GB 149.0GB
74.5GB
149.0GB 149.0GB
74.5GB
[ESC]-Exit [ENTER]-Select Menu
63
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk