Foxconn Quantumian1 User Manual page 104

2. Copy section 5-2, BIOS Configuration.
Shut down the computer, connect SATA hard disks to SATA ports, power on
computer again.
Press <Del> key, get into BIOS, set "SATA Mode" to [RAID Mode], press <F4> to
save and exit BIOS. PC will reboot.
Advanced
SATA Configuration SATA Configuration
SATA Mode
SATA Port 0
Not Present
Port Hot Plug
SATA Port 1
Not Present
Port Hot Plug
SATA Port 2
Not Present
Port Hot Plug
SATA Port 3
Not Present
Port Hot Plug
SATA Port 4
Not Present
Port Hot Plug
3. Copy section 5-3, Create RAID in BIOS.
Press <CTRL><I> simultaneously to get into RAID BIOS set up (Intel
age Technology enterprise utility).
Configure your new hard disks to RAID0, 1, 5 or 10. Exit RAID BIOS. PC will reboot.
4. The Windows XP is running again and a new hardware of RAID disk was found.
Click [Cancel] to skip this Wizard.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
[RAID Mode]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
(1) IDE Mode.
(2) AHCI Mode.
(3) RAID Mode.
Enabled onboard SATA RAID
option ROM if Launch Storage
OpROM is enabled.
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
97
®
Rapid Stor-
Click to exit.