Bios Configuration; Create Raid In Bios; Enter Raid Bios Setup - Foxconn Q77M Series User Manual

RAID CONFIGURATION
8. Format finished. Click "OK" to continue
copying of RAID driver into this diskette.
9. Check if the diskette contains the driver files.
Later, when in the process of installing
Windows XP in your RAID system, it will ask
you to use this floppy diskette to provide
driver for additional specific devices, for
example, a RAID device.
10. Install Serial ATA Hard Disks :
10-1. Shut down your computer.
10-2. Install SATA hard disks into the drive bays, connect all power and SATA cables.

5-2 BIOS Configuration

1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Set the "SATA Mode" to "RAID Mode". (Please refer to Chapter 3 BIOS Setup)
3. Press <F4> to save the setting then PC will reboot itself.

5-3 Create RAID in BIOS

enter RAID BIOS Setup

When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys simul-
taneously to enter the main menu of Intel® Rapid Storage Technology enterprise Option ROM
Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R w6AID5
RAID Volume :
None Defined.
Physical Devices:
ID
0
1
72
Intel(R) Rapid Storage Technology - Uption ROM - 11.0.8.1204
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
1. Create RAID Volume
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
[ DISK/VOLUME INFORMATION
Device Model Serial #
ST3320418AS 9VM8Y4D8
ST3160815AS 5RX4M04N
[↑↓]-Select
[ MAIN MENU ]
4. Recover Volume Options
5. Acceleration Options
6. Exit
]
Size
298.0GB
149.0GB
[ESC]-Exit [ENTER]-Select Menu
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk