Bios Configuration; Create Raid In Bios; Enter Raid Bios Setup - Foxconn Z75M-S Series User Manual

5-2 BIOS Configuration

1. Enter the BIOS setup by pressing <DEL> key during the POST(Power On Self Test).
2. Select the "SATA Configuration" from the "Advanced", then set the "SATA Mode" op-
tion to [RAID Mode].
3. Press <F4> to save the setting then PC will reboot itself.
Advanced
SATA Configuration
SATA Mode
SATA Port1
SATA Port2
SATA Port3
SATA Port4
SATA Port5
SATA Port6

5-3 Create RAID in bIoS

Enter RAID bIoS Setup

When BIOS is restarted, it will display a message asking you to press <Ctrl>+<I> keys
simultaneously to enter the main menu of Intel
Utility. Press the <Ctrl>+<I> to enter Configuration Utility.
1. Create RAID Volume
1 . Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volume :
None Defined.
Physical Devices:
ID Device Model
0 ST3320418AS
1 ST3160815AS
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
[RAID Mode]
Not Present
Not Present
Not Present
Not Present
Not Present
Not Present
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Intel(R) Rapid Storage Technology - Option ROM - 11.0.0.1339
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[ MAIN MENU
[ DISK/VOLUME INFORMATION
Serial #
9VM8Y4D8
5RX4M04N
(1) IDE Mode. (2) AHCI Mode.
(3) RAID Mode.
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Matrix Storage Manager Option ROM
®
]
4. Recover Volume Options
5. Acceleration Options
6. Exit
]
Size Type/Status(Vol ID)
298.0GB Non-RAID Disk
149.0GB Non-RAID Disk
70