Foxconn Quantumian1 User Manual page 82

Create RAID 10 (0+1)
1. Select "1.Create RAID Volume" from the main menu and press <Enter>.
2. In "Name" item, you can input a device name for the RAID10 system and press
<Enter> to apply it. Here, we name it as TryRAID10 to replace the default Volume0.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184
3. In "RAID Level" item, you can use Up or Down arrow key to make a selection.
Select RAID10(RAID0+1) and press <Enter>.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.0.0.1184
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]-Change [TAB]-Next
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
RAID 10: Mirrors data and stripes the mirror.
[↑↓]-Change [TAB]-Next
]
Volume0
TryRAID10
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
[ESC]-Previous Menu
]
TryRAID10
RAID0(Stripe)
RAID10(RAID0+1)
Select Disks
64KB
149.1 GB
N/A
Create Volume
[ HELP ]
[ESC]-Previous Menu
75
[ENTER]-Select
[ENTER]-Select